HOW TO MEASURE CURTAINS

Follow this step-by-step guide to measure your curtain rod or track, choose your hanging method and number of panels, and enter the correct width and height for your custom curtains.

No extra calculations are needed for pleats or fullness—we take care of that for you.

Step 1: Measure Your Curtain Rod or Track

Measure the usable width of your curtain rod or track, not just the width of your window. This measurement determines the total width your curtains need to cover.

If you're installing a new rod or track, we recommend extending it approximately 15–40 cm beyond each side of the window and positioning it 10–25 cm above the window frame for better light coverage and a balanced appearance.

Use the final usable width of your installed curtain rod or track when ordering.

How to Measure the Width Correctly

Curtain Rod

Measure the usable length of the rod between the decorative end caps (finials). Do not include the finials themselves.

Curtain Track

Measure the full usable length of the track from one end to the other.

Important: Take into account any brackets or end stops that may restrict curtain movement.

Step 2: Choose Your Hanging Method

Choose the hanging method that suits your curtain rod or track. We offer six hanging methods:

  • Pencil Pleat

    A timeless style with elegant, adjustable pleats.

  • Grommet

    A popular choice for contemporary spaces.

  • Ripple Fold

    Creates smooth, continuous waves and is designed for use with a compatible curtain track.

  • Rod Pocket & Back Tab

    Can be hung using either the rod pocket or the concealed back tabs for a clean, tailored look.

  • Pinch Pleated

    Creates a formal and elegant appearance with structured, evenly spaced pleats.

  • Rod Pocket

    The curtain rod passes directly through the pocket at the top for a simple, clean look.

Step 3: Choose Single Panel or Pair

Choose how many curtain panels you need.

The Width you enter always represents the total width to be covered.

Single Panel

One curtain panel covers the entire entered width.

Pair (2 Equal Panels)

Two curtain panels share the entered total width equally.

Example: Width = 200 cm

  • Single Panel: 1 panel covering 200 cm.
  • Pair: 2 panels, each covering 100 cm.

Quantity = 1 means one single panel or one pair (2 panels), depending on your selection.

Step 4: Enter Your Curtain Width

Enter the measured usable width of your curtain rod or track directly in the Width field.

Do not multiply the measurement or add extra width for pleats or fullness.

We automatically calculate the required fabric based on your selected hanging method.

Example

  • Measured rod or track width: 200 cm
  • Width to enter: 200 cm

This rule applies to all six hanging methods, whether you choose a Single Panel or a Pair.

Step 5: Measure and Enter Your Curtain Height

First, determine where to start measuring based on your selected hanging method and hardware. Then choose where you want your curtains to end.

Where to Start Measuring

Curtain Rod or Track

For curtains measured from the rod or track itself, measure from the top of the curtain rod or track.

Curtain Rings or Track Gliders

For curtains hung using rings or track gliders, measure from the bottom of the ring or glider.

Important: The correct starting point depends on your selected hanging method and hardware.

Where Your Curtains Should End

Just Above the Floor

For a clean, modern look, allow the curtains to end approximately 1–1.5 cm above the floor.

Puddling on the Floor

For a softer, more luxurious look, allow an additional 20–30 cm of fabric to rest on the floor.

Below the Window Sill

For shorter curtains, allow them to extend approximately 15–20 cm below the window sill. If there's a radiator underneath, leave approximately 2–3 cm of clearance above it.

Enter the measurement from the correct starting point to your desired curtain endpoint directly in the Height field.

Note: The entered Height applies to each individual curtain panel, including when you order a Pair.